Who We Are?

SA-International is an Egypt-based, internationally operating service provider, offering a wide range of activities and serving various industries and sectors like Oil & Gas, Petrochemicals, Fertilizers, Construction and others.

SA International Ltd is EGAC-certified ISO 17020 

As an ISO/IEC 17020: 2012 Certified Company, ISO /IEC 17020: 2012 in the field of NDT Non-Destructive Testing /Coating Inspection /Painting Inspection of Pressure Vessels / Tanks /Pipeline / Heat exchangers / Steel Structure / Electrical cables / Lifting equipment ,we guarantee our clients the highest-quality services according to the high standards we set for ourselves and constantly try to exceed.

As an ISO 9001 : 2015 , ISO 14001 : 2015 & ISO 45001: 2018 certified company, we guarantee our clients the highest-quality services according to the high standards we set for ourselves and constantly try to exceed.

We are registered with the Egyptian Authorities like the Egyptian General Petroleum Corporation (EGPC), the Egyptian Natural Gas Holding Company (EGAS), Ganoub El Wadi Petroleum Holding Co. (GANOPE) and the Power Generation and Engineering Co. (PGESCO).

Additionally SA-International is registered with 70+ companies in diverse sectors.

SA International was founded in 2008 and has been growing and developing steadily since then. The company’s main office is located in Alexandria, Egypt and established a subsidiary in Abu Dhabi/ UAE in 2011.

By now, we have achieved to build a network of 71 agents & partners worldwide to cover especially our vendor inspection activities and to support our clients in all regions of the world.

The portfolio of SA-International includes but not limited to the following services:

There are several inspection & NDT methods which already well known and being used in the industry since several decades, these services include but not limited to:

  • Ultrasonic Testing (UT)
  • Radigraphic Testing (RT)
  • Visual Testing (VT)
  • Liquid Penetrant Testing (PT)
  • Magnetic Particle Testing (MT)
  • Eddy Current Testing (ET)
  • Alternating Current Field Measurement (ACFM)
  • Vacuum Box Testing
  • HydroStatic Pressure Test
  • Leak Test
  • Positive Material Identification (PMI)
  • Holiday Detector for Coating Testing
  • Dry Film Thickness
  • Wet Film Thickness
  • Pull off Adhesion Test
  • Salt Contamination Metering
  • Portable Leeb Hardness Testing
  • Portable Ultrasonic Contact Impedance / Modified Vickers (UCI)
  • Remote Visual Inspection/Borescope (RVI)
  • Re-calibration of Crude Oil Storage Tank
  • Replica Test
  • Phased Array Ultrasonic (PAUT)
  • Time of Flight Diffraction (TOFD)
  • Computed Radiography (CR)
  • Digital Radiography (DR)
  • Small Controlled Area Radiography (SCAR)
  • Vibration Measurement and Analysis
  • Ultrasonic Flow Metering
  • Ultrasonic Leak Detection
  • Positive Material Identification (PMI)
  • Holiday Detector for Coating Testing
  • Dry Film Thickness
  • Wet Film Thickness
  • Pull off Adhesion Test
  • Salt Contamination Metering
  • Portable Leeb Hardness Testing
  • Portable Ultrasonic Contact Impedance / Modified Vickers (UCI)
  • Remote Visual Inspection/Borescope (RVI)
  • Re-calibration of Crude Oil Storage Tank
  • Replica Test
  • Phased Array Ultrasonic (PAUT)
  • Time of Flight Diffraction (TOFD)
  • Computed Radiography (CR)
  • Digital Radiography (DR)
  • Small Controlled Area Radiography (SCAR)
  • Vibration Measurement and Analysis
  • Ultrasonic Flow Metering
  • Ultrasonic Leak Detection
  • Positive Material Identification (PMI)
  • Holiday Detector for Coating Testing
  • Dry Film Thickness
  • Wet Film Thickness
  • Pull off Adhesion Test
  • Salt Contamination Metering
  • Portable Leeb Hardness Testing
  • Portable Ultrasonic Contact Impedance / Modified Vickers (UCI)
  • Remote Visual Inspection/Borescope (RVI)
  • Re-calibration of Crude Oil Storage Tank
  • Replica Test
  • Phased Array Ultrasonic (PAUT)
  • Time of Flight Diffraction (TOFD)
  • Computed Radiography (CR)
  • Digital Radiography (DR)
  • Small Controlled Area Radiography (SCAR)
  • Vibration Measurement and Analysis
  • Ultrasonic Flow Metering
  • Ultrasonic Leak Detection
Learn More
Get A Quote

SA-International provides the latest technologies in NDT, which save your time, your money and give you an accurate view about your assets to help you make the most appropriate action. these solutions including but not limited to:

  • Tank Services
  • Pipeline Inspection
  • Heat Exchanger Inspection
  • Boiler Inspection
  • Piping System Inspection
  • Pressure Vessel Inspection
  • Insulated Component Inspection
Learn More
Get A Quote

SA-International provide Destructive Testing also, like:

  • Tensile Testing
  • Bend Test
  • Impact Test
  • Chemical Analysis
  • Macro and Micro Analysis for Metal Grains
Get A Quote

Certified, professional inspectors thoroughly examine the tube body, as well as connections or end areas. We will check for possible discontinuities and wall loss in the tube body with our EMI equipment.

Our inspections meet or exceed API requirements, follow documented standard operating procedures and safety protocols. Both in-plant and mobile inspection services are available.

Get A Quote

Periodic inspection on all cranes and lifting equipment, this includes but is not limited to drilling equipment & tools, pedestal and overhead cranes, ROV/Dive spreads, fixed lifting equipment, lifeboats and life raft launch and recovery systems and loose lifting equipment.

SA-International provide multi skilled teams of inspector engineers who have the competence to carry out various Inspection work scopes, this provides the client with a one stop solution and minimizes any downtime and bed space issues.

SA-International are certified from Lifting Equipment Engineers Association (LEEA) to provide this service on behalf of LEEA.

Learn More
Get A Quote

Rope access is a form of work positioning – initially developed from techniques used in climbing and caving – which applies practical rope work to allow our workers to access difficult-to-reach locations without the use of scaffolding, cradles or an aerial work platform.

During the last years, SA International has achieved to build an experienced, international team of technicians covering all three qualification levels, accepted and approved by the UK based professional association IRATA.

Get A Quote

Safety valves are essential to the protection of lives and property, so regular testing is crucial to ensure that valves are functioning properly. But can you really be sure of the results if the test is not conducted under the stress of everyday conditions? Unsurpassed for accuracy, reliability and safety, the advanced technology of AccuTEST was developed to test safety valves while in position, under a full load, for consistently superior, reproducible results.

Learn More
Get A Quote

SA-International has extensive experience at all levels of inspection for wide range of different industries. We can provide experienced and highly qualified technical personnel from an extensive pool of inspectors available throughout the world.

Our mission is to provide the highest caliber inspection services in accordance with international standards and norms. Though activity started with inspection in the petroleum industry and related sectors, SA-International was diversifying into inspection services in other fields as well.

Vendor Inspection include but not limited to:

  • Third party inspection on materials and cargoes.
  • Inspection on behalf of and for regional and international inspection companies.
  • Pre-shipment inspection.
  • Inspection and Expeditor Services.
  • ARAMCO approved inspections.
  • Bechtel approved Inspections.
  • New projects QA/QC consultation.
  • High Technology NDT.
Learn More
Get A Quote

In many cases it’s impossible to be on-site with every supplier around the world, so there is a need for trusted local expeditors with in-depth knowledge of procurement, production and delivery processes.

Large-scale projects and the supply of critical goods and equipment can involve complex international supply chains, with items procured from suppliers in multiple countries. Late delivery from any one supplier can have an impact on the whole chain, preventing projects from being completed on time and on budget. Expediting means taking any action necessary to ensure that deliveries are made on time and to specification.

Expediting services enable your projects to proceed as scheduled and aid in minimizing delays and costly product deficiency issues.

Learn More
Get A Quote

Cleaning of pipelines, piping, pressure vessels and tanks is essential in some inspection methods or during maintenance, SA-International offers the best cleaning methods that suits all equipment and industries.

Get A Quote

SA-International provides engineering design for pressure vessels, heat exchangers, boilers, tanks, piping, pipelines, tankers, and firefighting systems. Repair and alteration design for static equipment, pipelines, and pressure vessels.

Learn More
Get A Quote

During welding process of materials in workshops or in fields, preheating and/or post weld heat treatment may be a requirement. These types of
thermal treatments are generally required in order to ensure suitable weld integrity and will typically prevent or remove undesirable characteristics and the residual stresses in the completed weld and the near base metal.

SA-International offers preheat & post weld heat treatment services. These include meeting the demands of heat treatment of welded structures.
SA-International will ensure that the service delivered is executed as per the international procedures.

Get A Quote

SA-International provides all scaffolding inspection and carry out the inspection by a competent person whose combination of knowledge in international standards, training and experience is appropriate for the type and complexity of the scaffold. Competence may have been assessed under the Construction Industry Scaffold Record Scheme (CISRS) or an individual may have recieved training in inspecting a specific type of system scaffold from manufacturer or supplier.

Get A Quote

Specialized in sourcing highly experienced and qualified Engineering Personnel for all sectors and industries according to our clients’ requirements.
Constantly updated and current database of 500,000+ pre-screened CV’s.

Learn More
Get A Quote

Are you looking for your first job? Or looking for a change of Careers? It pays to give some time and thought to where you are now and where you want to be. Once you have done this, you can choose the course that will get you there from our training courses.

Learn More
Get A Quote

SA-International has a mobile laboratory to carry out all environmental measurements and studies to aid you following the governmental regulations and protect the environment.

Learn More
Get A Quote
  • Seamless carbon steel pipe
  • Seamless stainless steel pipe
  • Pipe welding longitudinally
  • Pipe wrenches mineral
  • Tubes
  • GI gratings
  • I beams
  • H beams (HEA & HEB)
  • U channel / UPN
  • Stainless steel sheets
  • Mild steel plates
  • Flanges
  • Welding fittings
  • Seamless fittings
  • Valves
  • Angel bar
  • Stud bolts & nuts
  • Instrumentation
Get A Quote

Our Clients

Since the establishment of SA-International in 2008, we served great names in energy and industrial sectors around the world especially in the MENA region, they include but not limited to:

Countries Served

Ask us, request sample report or a quote